Basic Filter Housings
These housings use the four most basic cartridge sizes. Filter housings are sold as replacement parts, with mounting brackets and wrenches sold separately.
Size #1 Housings - for 2.5" x 9.75" Cartridges
This is the standard size for most undersink filters and reverse osmosis units.
(Note: We do not recommend clear housings for inline pressure applications.)
Aluminum mounting bracket with eight screws: four for attaching the filter housing to the mounting bracket and four for attaching the bracket to a wall.
Aluminum mounting bracket with ten screws: eight for attaching the filter housing to the mounting bracket and two for attaching the bracket to a wall.
Aluminum mounting bracket with fourteen screws: twelve for attaching the filter housing to the mounting bracket and two for attaching the bracket to a wall.
Size #2 Housings - for 2.5" X 20" Cartridges
Aluminum mounting bracket with eight screws: four for attaching the filter housing to the mounting bracket and four for attaching the bracket to a wall.
Size #3 Housings - for 4.5" X 10" Cartridges
Steel mounting bracket with eight screws: four for attaching the filter housing to the mounting bracket and four for attaching the bracket to a wall.
Size #4 Housings - for 4.5" X 20" Cartridges
Steel mounting bracket with eight screws: four for attaching the filter housing to the mounting bracket and four for attaching the bracket to a wall.
Site Index
Filtration Systems
- Aeration for Iron & Sulfide
- Backwashing Filters
(whole house & well units)
- Chlorine & Chemical Injectors
- Countertop Water Filters
- Garden Hose Filters
- Reverse Osmosis, Residential
- Reverse Osmosis, Commercial
- Shower Filters
- Specialty Filters
- Ultraviolet Systems
- Undersink Filters
- Water Softeners
- Whole House Filters
Cartridges
Parts
- Replacement Parts
- Faucets
- Filter Media
- Fittings
- Housings
- O-rings
- Pura UV
- R.O. Parts
- R.O. Tanks
- R.O. Booster Pump
- VIQUA UV